What Network Operations Should You Automate First? A Prioritisation Framework
Conxiea
9 May 2026
→ See How Conxiea's AI InfraOps Platform Handles Network Operations Automation End-to-End
The question most enterprise network teams face when starting a network operations automation programme isn't whether to automate, it's where to begin. Automate the right things first and you build momentum, confidence, and organisational buy-in. Automate the wrong things and you create fragility, erode trust in the platform, and make the next step harder.
This guide provides a practical framework for identifying where to start.
Network engineer reviewing operational task lists and automation options on a whiteboard
The Four-Axis Prioritisation Framework
The right automation starting point sits at the intersection of four variables. Score your candidate operations against each one and the priority order becomes clear.
Axis 1: Volume
High-volume operations deliver more total return from automation investment. An operation that occurs 200 times per month and takes 15 minutes each time represents 50 hours of engineering time monthly, automation that handles it reliably returns those 50 hours immediately, every month.
Low-volume operations, even complex ones, often don't justify the automation development cost until the programme has established its foundations.
Score high: Daily or weekly recurring tasks, high-frequency change types, operations triggered by common events.
Score low: Quarterly reviews, one-off migrations, rare exception handling.
Axis 2: Consistency
Automation works best on operations that follow predictable patterns. An operation that always involves the same sequence of steps, against the same types of devices, with the same validation criteria, is a strong automation candidate. An operation that varies significantly based on context, requires engineer judgment to scope, or has many exception paths is a weaker one.
The practical test: could you write a complete, unambiguous runbook for this operation that a junior engineer could follow with zero deviation? If yes, it's probably automatable. If the runbook would need constant exception clauses ("unless the device is in state X, in which case..."), it needs more design work first.
Score high: VLAN additions, standard firewall rule modifications, routine ACL updates, configuration backup.
Score low: Complex migrations, capacity planning decisions, multi-vendor topology changes.
Axis 3: Risk
Low-risk operations are the right starting point for building automation confidence. The cost of an automated error is proportional to the impact of the operation, a misconfigured firewall rule on a core device is a very different error from a misconfigured VLAN on an access switch.
This doesn't mean high-risk operations can't be automated, they can, and eventually should be. But starting with them means that early failures (which are inevitable in any new platform) happen at high-impact rather than low-impact, which damages confidence in the automation programme at exactly the point you need to be building it.
Score high: Access layer changes, read-only operations (monitoring, reporting), well-understood change types with limited blast radius.
Score low: Core routing changes, security policy modifications, changes with complex rollback requirements.
Axis 4: Current Pain
Automation value is highest where manual operations are creating the most friction. If a task is causing engineer burnout, creating a queue backlog, consistently running late, or generating the most change-related incidents, those are strong signals that it's worth prioritising regardless of where it sits on the other axes.
Talk to your engineers about what they find most tedious, most error-prone, or most time-consuming. The answers typically align well with the other prioritisation criteria, but occasionally surface high-value automation candidates that volume data alone wouldn't identify.
The Highest-Priority Automation Categories
Running the four-axis framework against typical enterprise network operations produces a consistent priority ordering.
Priority 1: Configuration Backup and Drift Detection
Why first: Configuration backup is high-volume, completely consistent, zero-risk as a read operation, and resolving the pain of not having it (no baseline to restore from after an incident) is immediately valuable.
Automated configuration backup, capturing every device configuration on schedule and on change detection, should be the first thing you deploy. Drift detection (comparing running configurations against baselines and alerting on deviation) extends this into continuous compliance monitoring with minimal additional complexity.
Both operations are read-only, which means there's no risk of the automation making things worse. If the platform has a bug, the worst outcome is a missed backup, not a mis-pushed configuration.
Priority 2: Routine Access Layer Changes
VLAN additions and deletions, port configuration changes, access control updates on access switches, these operations are typically high-volume, highly consistent, and low-blast-radius. They're also where most change-related errors occur, simply because of the volume.
Automating these with wrapped validation (pre-change state capture, change execution, post-change verification, automatic rollback on failure) is the first meaningful automation investment that touches write operations. Starting here builds the change automation muscle with limited exposure.
Priority 3: Compliance Reporting and Audit Trail Generation
For enterprises operating under regulatory frameworks, the operational cost of manual compliance evidence preparation is significant. Automating the capture and structured output of change audit trails, who authorised what, when, what the pre and post state was, what validation confirmed the outcome, delivers direct compliance cost reduction.
This is also the category that has the clearest ROI narrative for leadership, making it valuable early in the programme for maintaining organisational support.
Priority 4: Scheduled Operational Checks
Many networks run regular checks manually, interface error rate reviews, BGP peer state verification, certificate expiry monitoring, capacity utilisation reporting. These are ideal automation candidates: highly consistent, zero-risk (read-only), high-frequency, and time-consuming to run manually.
Automating scheduled checks frees engineer time immediately and improves the consistency and completeness of the checks, automated checks don't get skipped when the team is busy.
What to Leave Until Later
Some operations are worth automating eventually but shouldn't be in the first phase.
Complex incident response. Automated incident response, where the platform investigates an alert and takes remediation action, requires high confidence in the platform's contextual understanding of your environment. That confidence is built over time, not assumed from the start. Run your incident response automation in "recommend and wait for approval" mode initially, and move to autonomous action only for well-understood, low-risk remediation patterns.
Core infrastructure changes. Changes to core routing, WAN connectivity, or central security infrastructure have higher blast radius and more complex rollback requirements. Automate these after the platform has demonstrated reliability on lower-stakes operations.
Novel operation types. The first time your team encounters a new operation type, a new device platform, a new change pattern, a new vendor, automate it with human review in the workflow. Let the automation run a few cycles under engineer observation before removing the approval step.
Building Momentum
The practical value of getting prioritisation right goes beyond operational efficiency. The first phase of your automation programme shapes the culture and confidence around automation within the team.
Early wins, operations that are visibly faster, more reliable, and better documented than their manual equivalents, build the organisational appetite for more ambitious automation. Early failures, especially if they happen on high-visibility operations, do the opposite.
The conservative prioritisation framework above is designed to maximise the probability of early wins. Once the programme has demonstrated reliable delivery at lower risk levels, extending to more complex operations happens with organisational support rather than scepticism.
For the complete implementation path beyond prioritisation, our guide on how to automate network operations covers the full enterprise implementation roadmap step by step.
Evaluating Whether You Need a Platform
The right tooling for your automation programme depends on where you're starting and what you're trying to reach.
For small environments with simple, stable operations, Ansible-based automation with a well-maintained playbook library may be sufficient. For enterprise environments with complex topology, multiple vendors, regulatory compliance requirements, and ambitious automation coverage targets, a purpose-built platform with contextual intelligence is typically necessary to reach those targets without an unsustainable playbook maintenance burden.
Our guide to choosing network automation software covers how to evaluate platforms against your specific operational requirements. And our comparison of Ansible versus purpose-built enterprise automation is useful if you're currently Ansible-first and evaluating whether that's still the right fit.
Want to talk through where the highest-value automation opportunities are in your specific environment?
At Conxiea, we work with enterprise teams at every stage of automation maturity. A free consultation gives you an honest view of where automation would have the most impact and what a phased implementation would look like.
Related Reading
- How to Automate Network Operations: The Complete Enterprise Guide
- How to Automate Network Monitoring and Alerting
- How to Automate Network Change Management Safely
- Network Automation Software for Enterprises: The Complete Guide
- Why Network Automation Fails in Most Businesses
- 5 Signs Your Enterprise Has Outgrown Manual Network Operations