7 Network Automation Tools (And Why Most Teams Still Struggle in 2026)
Conxiea
1 April 2026
If you've searched for network automation tools, you've probably come across the same names: Ansible, Python, Terraform, NSO. The advice is always the same, pick one, get started, automate everything.
So why are most network teams still buried in manual work?
The honest answer: the tools aren't the problem. This guide breaks down the 7 most widely used network automation tools, what each one actually does well, where it falls short, and what it takes to make automation stick in 2026.
Network engineers managing infrastructure in a modern data centre
Already know why teams struggle? Jump to why network automation fails and what to do about it.
What Are Network Automation Tools?
Network automation tools are software platforms, frameworks, or libraries that replace manual, repetitive network tasks, configuration pushes, compliance checks, change management, troubleshooting, with repeatable, reliable processes.
At their best, they free your engineers from the grunt work so they can focus on architecture, security, and strategy. At their worst, they add another layer of complexity to an already fragmented environment.
The difference usually comes down to how, not which, tools you use.
The 7 Tools Every Network Team Should Know
1. Ansible
What it does: Ansible is the most popular network automation tool in the world. It uses human-readable YAML playbooks to define automation tasks, pushing configs, running compliance checks, updating firmware, across a wide range of vendors and platforms. It's agentless, so there's nothing to install on your devices.
When to use it: Multi-vendor environments where you need consistent automation across Cisco, Juniper, Arista, and others. It's the go-to for teams getting started with automation, thanks to its huge library of modules and an active open-source community.
Where it falls short: Ansible playbooks can get messy fast. As your network scales, maintaining large playbooks becomes a job in itself. Real-time feedback is limited, and it doesn't handle event-driven automation well without additional tooling.
Bottom line: Ansible is an excellent starting point, but treat it as one layer of your automation stack, not the whole strategy.
External resource: Red Hat Ansible for Network Automation
2. Python (with Netmiko / NAPALM)
What it does: Python is the Swiss Army knife of network engineering. Libraries like Netmiko (SSH connections to network devices) and NAPALM (multi-vendor network management) let you write scripts that connect to devices, send commands, and parse output. You can automate virtually anything if you're willing to write and maintain the code.
When to use it: Custom tasks, one-off integrations, or proof-of-concept automation. Python gives you total control, and it's the best tool for learning the fundamentals of how automation actually works at a device level.
Where it falls short: Scripts don't scale well across teams unless you treat them like production code. Poor documentation, no version control, and no testing leads to the classic "it worked on my laptop" problem.
Bottom line: Python is powerful, but it's a building block, not a platform. Without structure around it, you end up maintaining a pile of scripts instead of running an automated network.
External resource: Netmiko on GitHub
3. Cisco NSO (Network Services Orchestrator)
What it does: NSO is a service orchestration platform built for large, complex networks. It abstracts vendor-specific commands behind a service model, define what you want (a VPN, a firewall rule, a QoS policy), and NSO translates that into device-specific configurations across your entire infrastructure.
When to use it: Large enterprise or service provider environments with thousands of devices, mixed vendor estates, and a need for service-level automation rather than just task-level scripts.
Where it falls short: Steep learning curve. Heavy Cisco dependency in practice, despite vendor-neutral claims. Significant investment in training, integration, and ongoing maintenance.
Bottom line: NSO is a genuinely powerful platform for the right environment, but it's overkill for most teams, and under-resourced deployments often go unused.
External resource: Cisco NSO Overview
4. NetBrain
What it does: NetBrain takes a visibility-first approach to automation. It creates dynamic, real-time maps of your network and lets you automate troubleshooting workflows, documentation, and change management on top of that map. The idea is: see what's happening, then automate the response.
When to use it: Large distributed networks where poor documentation and slow troubleshooting are costing hours every week. NetBrain's strength is reducing mean time to resolution (MTTR) and making your network self-documenting.
Where it falls short: Resource-intensive. Not always real-time. Requires significant setup and integration to deliver on its promise.
Bottom line: NetBrain is a strong choice for teams where visibility is the bottleneck, but it works best as part of a broader automation architecture, not a standalone solution.
5. Itential
What it does: Itential is a low-code network automation and orchestration platform. Drag-and-drop workflow builder, pre-built integrations with ITSM, cloud, and security tools, and a focus on making automation accessible to the whole team, not just the engineers who can write Python.
When to use it: Teams that want to empower network operators, help desk staff, and non-developers to participate in automation. Also strong for organisations that need to connect network automation into their existing ITSM workflows (ServiceNow, Jira, etc.).
Where it falls short: Low-code means less flexibility for highly custom logic. You may hit ceilings if your requirements are complex or your environment is unusual.
Bottom line: Itential is one of the most underrated tools in the space. If cross-team adoption is your goal, it's worth a serious look.
6. Auvik
What it does: Auvik is a cloud-based network monitoring and management platform with automation features built in, config backup, change detection, automated alerts, and network mapping. It's designed to be fast to deploy and easy to use.
When to use it: Managed service providers (MSPs) and IT teams that need fast visibility and basic automation without heavy infrastructure investment. If you want something up and running in hours rather than weeks, Auvik delivers.
Where it falls short: Auvik is more monitoring than automation. For advanced orchestration, custom workflows, or large-scale enterprise environments, you'll need to supplement it with more capable platforms.
Bottom line: Auvik's strength is simplicity. Don't try to make it something it's not, use it for visibility and let other tools handle the heavy automation lift.
External resource: Auvik's Guide to Network Automation
7. Terraform (for Network Infrastructure)
What it does: Terraform is an infrastructure-as-code (IaC) platform that lets you define your network infrastructure, cloud networking, firewalls, load balancers, VPCs, in version-controlled code, then deploy and manage it automatically. It's vendor-agnostic and integrates with AWS, Azure, GCP, and most major network vendors.
When to use it: Cloud and hybrid environments where network provisioning needs to be repeatable, auditable, and scalable. Terraform is the standard for treating your network like code, especially when cloud and on-premises infrastructure need to work together.
Where it falls short: Terraform isn't built for day-to-day operational automation or real-time changes. It's a provisioning and lifecycle management tool, not an event-driven automation engine.
Bottom line: If you're doing anything in cloud or hybrid environments and you're not using Terraform, you're making your life harder than it needs to be.
External resource: Terraform Network Automation on HashiCorp
Team collaborating on a network automation strategy in 2026
Why Having the Tools Still Isn't Enough
Here's the uncomfortable truth that most vendor blogs won't tell you: most teams that have these tools are still firefighting.
They've deployed Ansible. They have Python scripts. Maybe even Terraform for the cloud stuff. And they're still logging into devices manually, still doing change reviews by hand, still getting paged at 2am for things that automation should have caught.
Why?
The tools don't talk to each other. Ansible handles configs, Terraform handles provisioning, Python scripts handle everything else. There's no single orchestration layer connecting them.
There's no closed loop. Automation runs, but nobody validates the outcome. Manual checks creep back in. Trust in automation erodes.
Automation is treated as a project, not a practice. Quick wins get celebrated, but there's no long-term investment in standards, documentation, or continuous improvement.
See the full breakdown: Why Network Automation Fails in Most Businesses
What Actually Moves the Needle
The teams that make automation work in 2026 aren't using more tools. They're doing three things differently:
1. Orchestration over point solutions. They connect their tools into end-to-end workflows. A change request triggers validation, which triggers deployment, which triggers automated testing, all without manual handoffs.
2. Closed-loop validation. Every automated change is verified. Not by a human logging in afterwards, but by the automation itself checking the outcome against the expected state.
3. Automation as a core capability. Not a side project. Not one engineer's responsibility. A team-wide practice, with shared playbooks, version control, and continuous improvement built in.
Is Your Network Automation Actually Working?
If you're not sure, that's usually the answer.
The right automation strategy connects your tools, validates your changes, and gives your team back the time they're currently losing to manual work. Whether that means filling gaps in your existing toolset or rethinking the approach from scratch depends on where you are today.
- Want to understand the business case? Read The Real ROI of Network Automation
- Need help with a specific environment? Talk to our team
- Running a smaller operation? See Network Automation for Small Business